Search found 3604 matches
- 27 May 2024, 22:01
- Forum: ESP Easy: Software
- Topic: Hostname not recognized
- Replies: 7
- Views: 99
Re: Hostname not recognized
Pieter, Thanks for the encouragement 8-) It's ESPEasy that's removing any non-allowed characters from the hostname, and using DHCP is the reason the name is now picked up by the router. As there are routers and other network devices that don't accept names that do not conform to RFC952, ESPEasy has ...
- 27 May 2024, 20:22
- Forum: ESP Easy: Projects / Applications
- Topic: espEasy - Thingspeak - BME280
- Replies: 8
- Views: 137
Re: espEasy - Thingspeak - BME280
Guys, first of all thanks for the many replies. Awesome board!!! :twisted: I did update to version: 20240525 normal 4M littleFS ETH [ESP32] but the "old" version isnt the problem. The BME280 was on IDX 0, changing it to 1, like adviced, helped at least with the temperature problem. Now th...
- 27 May 2024, 15:47
- Forum: ESP Easy: General Discussion
- Topic: check if the mqqt server is present
- Replies: 8
- Views: 111
- 27 May 2024, 14:23
- Forum: ESP Easy: General Discussion
- Topic: check if the mqqt server is present
- Replies: 8
- Views: 111
- 26 May 2024, 23:25
- Forum: ESP Easy: Projects / Applications
- Topic: espEasy - Thingspeak - BME280
- Replies: 8
- Views: 137
Re: espEasy - Thingspeak - BME280
Hmm, seems the field numbers are limited to 1..8, and a channel has to be specified somewhere, but atm, I don't see how that has to be specified in the api call we use for sending data to Thingspeak.
Will do some more investigation tomorrow.
Will do some more investigation tomorrow.
- 26 May 2024, 23:10
- Forum: ESP Easy: Projects / Applications
- Topic: espEasy - Thingspeak - BME280
- Replies: 8
- Views: 137
Re: espEasy - Thingspeak - BME280
Did some digging in the code (never used the Thingspeak controller myself :?), and you have to set an offset for the field number to use in the IDX field where you enabled the Thingspeak controller for the task. The first IDX/offset to use should be 1, not the default value 0. For any other tasks yo...
- 26 May 2024, 21:59
- Forum: ESP Easy: General Discussion
- Topic: check if the mqqt server is present
- Replies: 8
- Views: 111
Re: check if the mqqt server is present
MQTTImport#Disconnected has to do with the MQTT Import plugin P037, and is, sort of, independent from the MQTT#Disconnected event. (IMHO) you can ignore the MQTTImport events for this.
- 26 May 2024, 21:28
- Forum: ESP Easy: Software
- Topic: P092_DLbus UVR42
- Replies: 36
- Views: 11852
Re: P092_DLbus UVR42
We even have a wiring suggestion for the UVR42 in the documentation https://espeasy.readthedocs.io/en/lates ... uvr42-page
This doesn't have a galvanic separation, but would be the first thing to try 'if all else fails'.
This doesn't have a galvanic separation, but would be the first thing to try 'if all else fails'.
- 26 May 2024, 21:22
- Forum: ESP Easy: Software
- Topic: Hostname not recognized
- Replies: 7
- Views: 99
Re: Hostname not recognized
So this problem is solved.. Though not fully understood. :? Well, TD-er already wrote a possible cause above; when using a fixed IP address, the ESP plainly connects to the router, claiming the configured IP-address, not sharing much other information except the (required) MAC address. But when usi...
- 26 May 2024, 21:00
- Forum: ESP Easy: Projects / Applications
- Topic: espEasy - Thingspeak - BME280
- Replies: 8
- Views: 137
Re: espEasy - Thingspeak - BME280
Under info it shows me the following: Build:⋄ 20240229 - Mega32 System Libraries:⋄ ESP32 SDK 4.4.6 Git Build:⋄ HEAD_430cc29 Plugin Count:⋄ 48 ["Normal"] Build Origin: GitHub Actions Build Time:⋄ Feb 29 2024 16:18:30 Binary Filename:⋄ ESP_Easy_mega_20240229_normal_ESP32_4M316k Build Platfo...
- 26 May 2024, 20:53
- Forum: ESP Easy: General Discussion
- Topic: check if the mqqt server is present
- Replies: 8
- Views: 111
Re: check if the mqqt server is present
For this purpose there are the MQTT#Connected and MQTT#Disconnected events.
When receiving the mqtt#disconnected event you can start any precautious measures needed, and revert them once the server is connected again.
When receiving the mqtt#disconnected event you can start any precautious measures needed, and revert them once the server is connected again.
- 26 May 2024, 13:19
- Forum: ESP Easy: Software
- Topic: P092_DLbus UVR42
- Replies: 36
- Views: 11852
Re: P092_DLbus UVR42
Again you also have a pulse counter task on the GPIO that's to be used by the DL-bus reader. Can you disable all but 1 task that is trying to use that GPIO, (one of the DL-bus tasks should be the only one enabled), to exclude that as a possible cause of interference? There are, AFAICS, no other repo...
- 26 May 2024, 13:07
- Forum: ESP Easy: Projects / Applications
- Topic: espEasy - Thingspeak - BME280
- Replies: 8
- Views: 137
Re: espEasy - Thingspeak - BME280
What exact .bin file did you install on your ESP?
- 25 May 2024, 23:14
- Forum: ESP Easy: Software
- Topic: Add new sensor (Ambient Light Sensor - VEML6030)
- Replies: 13
- Views: 725
Re: Add new sensor (Ambient Light Sensor - VEML6030)
Hmm, might be a silly question, but you did select the 0x48 address from the combobox, right?
- 25 May 2024, 16:14
- Forum: ESP Easy: Software
- Topic: NeoPixel-038 not working on ESP32s3 zero or mini boards
- Replies: 20
- Views: 600
Re: NeoPixel-038 not working on ESP32s3 zero or mini boards
Can you test using the latest MEGA merge from this Actions run, it has improvements in the Framework that might help with the NeoPixel issue.
- 25 May 2024, 15:07
- Forum: ESP Easy: Projects / Applications
- Topic: Controlling a Bluetti PowerStation
- Replies: 1
- Views: 47
Re: Controlling a Bluetti PowerStation
Hmm, are there other ways to communicate with the device than Bluetooth? As ESPEasy doesn't support connections via Bluetooth, atm.
- 24 May 2024, 19:15
- Forum: ESP Easy: Software
- Topic: Add new sensor (Ambient Light Sensor - VEML6030)
- Replies: 13
- Views: 725
Re: Add new sensor (Ambient Light Sensor - VEML6030)
Can you disconnect all other sensors from your ESP, so only the VEML (not sure what type you use) is connected? Possibly the combined pull-up resistors cause a too low value, so the sensor can't work properly.
I have tested using a VEML7700 myself.
I have tested using a VEML7700 myself.
- 22 May 2024, 23:03
- Forum: ESP Easy: General Discussion
- Topic: Degree shown in DOT-MAtrix 7219
- Replies: 9
- Views: 556
Re: Degree shown in DOT-MAtrix 7219
@bison00 I did some digging into the library code, and in the default font, despite what's listed in the documentation, the degree symbol is at ascii character 176, so if you use that '░' as a literal character in your rules, you should get the degree displayed (untested, matching hardware is tempor...
- 22 May 2024, 08:21
- Forum: ESP Easy: General Discussion
- Topic: Seeed i2c water level sensor
- Replies: 34
- Views: 575
Re: Seeed i2c water level sensor
Great
I've also ordered a sensor, and expect to get it delivered today or tomorrow, so I'll play with it soon
I've also ordered a sensor, and expect to get it delivered today or tomorrow, so I'll play with it soon
- 21 May 2024, 16:03
- Forum: ESP Easy: General Discussion
- Topic: in log calculate unknown token
- Replies: 2
- Views: 57
Re: in log calculate unknown token
This:
Code: Select all
Elseif [gr#Power_W] => 400 and [Var#1]= 1 // si w > 400 et var 1 = 1 securite
Code: Select all
Elseif [gr#Power_W] >= 400 and [Var#1]= 1 // si w > 400 et var 1 = 1 securite
- 21 May 2024, 08:21
- Forum: ESP Easy: General Discussion
- Topic: Seeed i2c water level sensor
- Replies: 34
- Views: 575
Re: Seeed i2c water level sensor
Mostly for lack of a better category. Environment implies it has something to do with our living environment, like temperature, humidity etc. and a water level doesn't do that, IMHO. It is an input-only sensor though...
- 20 May 2024, 21:50
- Forum: ESP Easy: Software
- Topic: Which Bin for flashing ESP32-C3 ETH01 evo
- Replies: 56
- Views: 1839
Re: Which Bin for flashing ESP32-C3 ETH01 evo
Now I am sure I have the right version of the build you offer to me. Send you this screenshot before I press on Update Firmware. https://i.ibb.co/z4ndvTm/Update.jpg I waited for 15 minutes but the browser does not refresh.. :cry: After a cold reset I still remain in the old version... Strange, mayb...
- 20 May 2024, 20:19
- Forum: ESP Easy: General Discussion
- Topic: Seeed i2c water level sensor
- Replies: 34
- Views: 575
Re: Seeed i2c water level sensor
The one I tried compiling. Both cases it came back up but I didn't see the 170 in the list of devices when I tried to add a new device. I don't think you pulled the PR to your local system with the commands you listed, the PR is in the pull/5056 pseudo-branch on GH. My workflow for building someone...
- 20 May 2024, 20:08
- Forum: ESP Easy: General Discussion
- Topic: Seeed i2c water level sensor
- Replies: 34
- Views: 575
Re: Seeed i2c water level sensor
From the zip file downloaded, I tried uploading the *.factory.bin If you upload that via the Web UI, the unit will go into an endless boot-loop... :shock: When updating via the Web UI (Tools/Firmware update) you should update only the 'sketch', the .bin file, that's installed at the 'other' app par...
- 20 May 2024, 19:57
- Forum: ESP Easy: Software
- Topic: Which Bin for flashing ESP32-C3 ETH01 evo
- Replies: 56
- Views: 1839
Re: Which Bin for flashing ESP32-C3 ETH01 evo
You're still on the original build, you should have a binary dated today, and downloaded from the link I shared above, there is now also an Energy LittleFS build for the ESP32-C3, this download: https://github.com/letscontrolit/ESPEasy/actions/runs/9160400873/artifacts/1519579985 Edit: As said, the ...
- 20 May 2024, 19:52
- Forum: ESP Easy: General Discussion
- Topic: Seeed i2c water level sensor
- Replies: 34
- Views: 575
- 20 May 2024, 19:51
- Forum: ESP Easy: General Discussion
- Topic: Seeed i2c water level sensor
- Replies: 34
- Views: 575
Re: Seeed i2c water level sensor
... (the INA219 doesn't seem to want to read current and the BME240 apparently doesn't support humidity. The two I ordered to replace it wouldn't work at all. ... Both the INA219 and BME280/BMP280 (and a lot of other sensors too) are often 'unclearly labeled' by many of the low-cost suppliers (Alie...
- 20 May 2024, 19:43
- Forum: ESP Easy: Software
- Topic: Which Bin for flashing ESP32-C3 ETH01 evo
- Replies: 56
- Views: 1839
Re: Which Bin for flashing ESP32-C3 ETH01 evo
H Ton, There was no need for that action. The release seems oke to me. The board is running for over 3 days and serves the needed info from the modbus meter over mqtt to Domoticz and Node-Red. That was a change that was on the TODO list anyway, so no better time to start it when someone can make go...
- 20 May 2024, 19:38
- Forum: ESP Easy: General Discussion
- Topic: mqttimport does not throw an event
- Replies: 2
- Views: 59
Re: mqttimport does not throw an event
What have you configured in the MQTT Import task? You need to setup the topic(s) you want to import, it won't give you the raw data, as you can (easily) process that using rules.
- 20 May 2024, 19:32
- Forum: ESP Easy: General Discussion
- Topic: Seeed i2c water level sensor
- Replies: 34
- Views: 575
Re: Seeed i2c water level sensor
can you please test, using a build from this GH Actions run ? OK, in preparation for when it shows up, I have a feeling I'm going to need a little more info to know how to build something off of that. (not a C person and I have a love-hate relationship with git) ... But again don't see P170. So wha...
- 20 May 2024, 17:25
- Forum: ESP Easy: Software
- Topic: Which Bin for flashing ESP32-C3 ETH01 evo
- Replies: 56
- Views: 1839
Re: Which Bin for flashing ESP32-C3 ETH01 evo
Pieter, I've created a pull request #5057 to switch most LittleFS builds (ESP32 all using IDF 5.1) to include Ethernet support. You can download the (newly added) ESP32c3 Energy LittleFS ETH build from this GH Actions run , that should be usable to upgrade your ETH01 EVO, and include the Eastron plu...
- 20 May 2024, 16:12
- Forum: ESP Easy: General Discussion
- Topic: Domoticz MQTT Controller - Modify send data
- Replies: 1
- Views: 43
Re: Domoticz MQTT Controller - Modify send data
Hi,
At the moment this is not possible, but why would you want to do that? Domoticz handles all that data just fine, no reason to leave it out, AFAICS?
At the moment this is not possible, but why would you want to do that? Domoticz handles all that data just fine, no reason to leave it out, AFAICS?
- 20 May 2024, 14:15
- Forum: ESP Easy: General Discussion
- Topic: Seeed i2c water level sensor
- Replies: 34
- Views: 575
Re: Seeed i2c water level sensor
@treii28 I've created Pull request #5056 to add support for the Seeed studio I2C Liquid Level sensor.
Assuming you either own or have ordered such sensor, can you please test, using a build from this GH Actions run?
You can report your findings & remarks here or in the PR.
Assuming you either own or have ordered such sensor, can you please test, using a build from this GH Actions run?
You can report your findings & remarks here or in the PR.
- 19 May 2024, 20:09
- Forum: ESP Easy: Hardware
- Topic: ESP32 I2C PINS
- Replies: 1
- Views: 54
Re: ESP32 I2C PINS
GPIO 34..39 are input-only on ESP32 (Classic)
They even got a special paragraph in the ESPEasy documentation: https://espeasy.readthedocs.io/en/lates ... gpio-34-39 (Scrolling up from there will show you more info on ESP32 GPIO pins)
They even got a special paragraph in the ESPEasy documentation: https://espeasy.readthedocs.io/en/lates ... gpio-34-39 (Scrolling up from there will show you more info on ESP32 GPIO pins)
- 19 May 2024, 17:04
- Forum: ESP Easy: Software
- Topic: Which Bin for flashing ESP32-C3 ETH01 evo
- Replies: 56
- Views: 1839
Re: Which Bin for flashing ESP32-C3 ETH01 evo
If you are building your own Custom build, either by using a Custom.h or by modifying pre_custom_esp32.py (that's used for ESP32, ESP32-S2/S3 and ESP32-C3), you have to enable that by defining FEATURE_RULES_EASY_COLOR_CODE to be 1 or true. For ESP8266 in most builds this has been turned off for buil...
- 18 May 2024, 17:04
- Forum: ESP Easy: Software
- Topic: Add new sensor (Ambient Light Sensor - VEML6030)
- Replies: 13
- Views: 725
Re: Add new sensor (Ambient Light Sensor - VEML6030)
@knighToFdemonS I've created Pull Request #5055 to add support for VEML6030 and VEML7700. I've tested locally using a VEML7700, but don't have a VEML6030 available, so if you have one, please (also) test using that sensor. A build is running from this GH Actions run . Please report your findings her...
- 16 May 2024, 20:27
- Forum: ESP Easy: Software
- Topic: which firmware / pio settings for Xiao S3?
- Replies: 3
- Views: 91
Re: which firmware / pio settings for Xiao S3?
Yes, that seems to be the right build for your ESP. No need to change Platformio.ini (to prevent accidental committing that change), you can, from the PlatformIO menu (Alien icon) in VSCode, expand that build (yes, there are quite a few...), and compile it from there. But to make development somewha...
- 16 May 2024, 20:17
- Forum: ESP Easy: General Discussion
- Topic: Seeed i2c water level sensor
- Replies: 34
- Views: 575
Re: Seeed i2c water level sensor
I've reserved P170 for this plugin, and put it on my name
I'll need you for testing once I've done some coding.
I'll need you for testing once I've done some coding.
- 15 May 2024, 23:37
- Forum: ESP Easy: General Discussion
- Topic: serialsend command with 2 serial servers?
- Replies: 2
- Views: 72
Re: serialsend command with 2 serial servers?
You can achieve that by prefixing the taskname and a period to the command, as documented here
So, use:
Assuming your tasks are named TaskA and TaskB (task names are not case-sensitive)
So, use:
Code: Select all
[taskA].serialsend,your_data
[taskB].serialsend,data_for_other_port
- 15 May 2024, 23:25
- Forum: ESP Easy: General Discussion
- Topic: Seeed i2c water level sensor
- Replies: 34
- Views: 575
Re: Seeed i2c water level sensor
That sensor is using a rather weird technique of 2 I2c addresses to read different parts of the data. Haven't seen that before, this sensor isn't yet supported by ESPEasy. For developing an ESPEasy plugin, there's sort of a standard procedure: - Request a new plugin ID at https://github.com/letscont...
- 15 May 2024, 23:06
- Forum: ESP Easy: Software
- Topic: Publishing Environment - 1-Wire Temperature Statistics
- Replies: 14
- Views: 462
Re: Publishing Environment - 1-Wire Temperature Statistics
@antro31 I've changed the argument separator for this plugin from comma to dot (period), so after you update to this GH Actions run, you'll have to update your rules!
So you'd have to use like this: [Pool#sensorstats.1.success]
This will go into the release version, so no reason not to update
So you'd have to use like this: [Pool#sensorstats.1.success]
This will go into the release version, so no reason not to update
- 14 May 2024, 15:08
- Forum: ESP Easy: Software
- Topic: Publishing Environment - 1-Wire Temperature Statistics
- Replies: 14
- Views: 462
Re: Publishing Environment - 1-Wire Temperature Statistics
Great, thanks for the feedback
- 14 May 2024, 12:46
- Forum: ESP Easy: Software
- Topic: Publishing Environment - 1-Wire Temperature Statistics
- Replies: 14
- Views: 462
Re: Publishing Environment - 1-Wire Temperature Statistics
I was able to fix it sooner than expected, so a GH Actions run is on its way.
Please update and retest.
Please update and retest.
- 14 May 2024, 09:51
- Forum: ESP Easy: Projects / Applications
- Topic: Moisture Sensor from BeFlE
- Replies: 40
- Views: 6455
Re: Moisture Sensor from BeFlE
I2C Scan should at least list the address, the device names may be excluded, not sure if these names are included in the Custom build. You can enter the found address in the I2C Address field, but I assume you already tried that. Adding a 10k pull-up to 3V3 on both SDA/SCL should fix the pull-up sta...
- 14 May 2024, 09:03
- Forum: ESP Easy: Software
- Topic: Publishing Environment - 1-Wire Temperature Statistics
- Replies: 14
- Views: 462
Re: Publishing Environment - 1-Wire Temperature Statistics
Hm, I now see where I made a typo (actually, a copy/paste error)
Will be able to fix that later today, not near my ESPEasy development system ATM.
Will be able to fix that later today, not near my ESPEasy development system ATM.
- 14 May 2024, 08:38
- Forum: ESP Easy: Projects / Applications
- Topic: Moisture Sensor from BeFlE
- Replies: 40
- Views: 6455
Re: Moisture Sensor from BeFlE
A few questions: - How long are the wires to your sensor? - Do you have pull-up resistors installed on the SDA and SCL lines? - You didn't swap the SDA and SCL wires? (no harm, but won't work) - Was the sensor used by someone else before you got it, and reprogrammed it to I2C Address 0x01? - I assum...
- 14 May 2024, 08:29
- Forum: ESP Easy: Software
- Topic: Publishing Environment - 1-Wire Temperature Statistics
- Replies: 14
- Views: 462
Re: Publishing Environment - 1-Wire Temperature Statistics
Ah nope, saw what Ton did: https://github.com/letscontrolit/ESPEasy/pull/5051 A bit strange to use a comma here, as we don't do that anywhere else. Why not a dot, Ton? Well, I did that also in other plugins, like P011 and P087, and in AdafruitGFX_Helper (for all supported Display plugins P095, P096...
- 13 May 2024, 20:57
- Forum: ESP Easy: Projects / Applications
- Topic: Moisture Sensor from BeFlE
- Replies: 40
- Views: 6455
Re: Moisture Sensor from BeFlE
Here's a Custom build with the new P047 - Environment - Soil moisture sensor with support for the BeFlE v3.x hardware
- 13 May 2024, 14:02
- Forum: ESP Easy: General Discussion
- Topic: accuracy dht22 sensor
- Replies: 4
- Views: 119
Re: accuracy dht22 sensor
That plugin has the plugin statistics enabled, but that entire feature is disabled for the Collection, Minimal and 1M (like the ESP01S) builds (and other 'bin-size limited' ESP8266 builds)... :shock: When buying new ESP's go for an ESP32 (dual-core, stable workhorse), ESP32-S3 (dual-core, many GPIO'...
- 13 May 2024, 10:59
- Forum: ESP Easy: Projects / Applications
- Topic: Moisture Sensor from BeFlE
- Replies: 40
- Views: 6455
Re: Moisture Sensor from BeFlE
What MQTT Controller?