Door switch

[Lars65]

I have tried to set up the ESP01 as a door switch. I can see that the ESP is working, but I can't get the Domoticz to work.
I have created a virtual switch, and from the virtual swittch added a sensor. Programed the ESP01 in the web interface with the IDX from the virtual switch. But there is no action in the domoticz.
What am I doing wrong here?
Do I need to add som script to the virtual sensor?

[casi99]

Hi,
there can be many blocking points:
1.can you see in the ESPeasy if it shows the right status of the switch? (right GPIO, Pullup)
2. do you have put in Domo the switch online?

br
Carsten

[maluko]

hi

Did you put the Esp01 IP on domoticz definitions?
espeasy dont have field to put the user and pass to acess domoticz so you have to add manualy.
Domoticz >setup > settings > Local Networks (no username/password)

[Lars65]

Thank you guys!!

It was the network configuration in Domoticz, which did the trick.
Now it's working like a charm.